Close

WM2200U Professional Headsets Wireless Microphone

New

Find out the sound quality effect you like, and the install the core into the wireless microphone circuit with the chip, The wireless mic sound quality effect can be almost the same as the effect of the wired microphone so the tone of the sound has become a reference, to the standard of a wired microphone, you can easily select the core to select the core to select the sound quality.

More details

SGD 219.90 tax excl.

More info

We used to do experiments in the KTV room: to appropriately reduce the launch power of the handle (20-30 meter in use distance), using the "map four-color principle" method, each separated two-room.
can connect to multi-mic with different frequencies.
PERFORMANCE AND SPECIAL

If the receiver of the rain station should be set at a high distance( for example 10meter) the frequency alarm can be reused, such as if the receiver of the rain station only needs to separate the fixed distance. (for example, 10 meters)
with automatic static speech and shock elimination circuit, to avoid the middle stroke and noise of the gouging machine.
the handle has the function of LED digital tube display, and can directly pull the current display frequency.
wireless transmission effective distance 30-50 meter)
the battery circuit designed by hand has overcharge and over-discharge protection.
the simple operation interface and the few adjustable parts can completely avoid the malfunction caused by misoperation.
excellent speech quality, so that you can talk or song is loose and free.
The mic data is sent bt wireless to the receiver to match the frequency. if the match is successful, the frequency can be switched between 10 frequency. and the handheld can change the frequency at any time then the receiver will follow the handheld to adjust the frequency automatically and jump to the corresponding frequency.
provides the flexibility of frequency setting.

SPECIFICATIONS

2.1 TRANSMITTER TECHNICAL SPECIFICATION

Frequency: 676-697MHz
the channel number of 10 conservative values each time the positive .ID. in the manufacturer set the switch.
Oscillation mode DSP chip frequency locking
frequency-stable 10 pm
RF efficiency 10 dBm
FG 40-18000Hz
distortion <0.59
battery specification 1.SVIAA Size battery
dedicated time 4-8Hours (specification: frequency norm 676-679MHz, depending on battery type and capacity.
The products using frequency hooping have been widely recognized by the market, and meet the requirement of the most products such as KTV room hand towing box, suitcase, teaching, personal entertainment, set-top box wireless speaker, SOUND-BAR wireless bass and so on.
2.2 RECEIVER SPECIFICATIONS

Frequency:676-697MHz
the number of channels is 10 (each conservative value is timed by ID lattice, in the manufacturer's frequency
Oscillation mode DSP chip frequency fixed
rate stability + 10 ppm
bonding instruction -95-71dBm
Frequency 40-1800Hz2
distortion <0.59
signal ratio 390dB
high frequency output 300m/r (maximum)

Reviews

No customer reviews for the moment.

Write a review

WM2200U Professional Headsets Wireless Microphone

WM2200U Professional Headsets Wireless Microphone

Find out the sound quality effect you like, and the install the core into the wireless microphone circuit with the chip, The wireless mic sound quality effect can be almost the same as the effect of the wired microphone so the tone of the sound has become a reference, to the standard of a wired microphone, you can easily select the core to select the core to select the sound quality.

For Customer in Singapore

Please kindly visit link below if you're interest to purchase our products:

Select Country

Product Order is Available in Malaysia

6 other products in the same category

Viewed products

Close